Common questions and maintain methods in HGM series ultrafine powder grinding mill
Common questions and maintain methods
HGM series ultrafine powder grinding mill is a common grinding equipment, mainly used for processing various non-metallic ores and powdery materials. In the process of use, you may encounter some common problems, the following are some possible use problems and maintenance methods:
1.Motor overheats or shuts down.
Possible reasons: Motor load is too large and cooling is poor.
Maintenance method: Check the load of the motor to ensure it is operating within the rated load range, clean the dust around the motor and ensure good ventilation.
2. Grinding disc or roller wear.
Possible reasons: Wear due to prolonged use.
Maintenance method: Regularly check the wear of the grinding disc or roller. If there is any wear, replace the worn parts in time.
3. Pulverizer output decreases.
Possible reasons: Insufficient feed volume, severe wear and tear, and blocked screen.
Maintenance methods: Check the feed amount to ensure that it meets the processing capacity of the equipment; replace worn parts; clean the screen.
4. The grinder is too noisy.
Possible reasons: Equipment parts are loose, worn, and unbalanced.
Repair methods: Tighten loose parts, replace severely worn parts, and balance worn parts.
5. Electrical failure.
Possible reasons: Circuit failure, electrical components are damaged.
Repair methods: Check the circuit and repair the fault; replace damaged electrical components.
6. Excessive vibration.
Possible reasons: The installation is unbalanced and the foundation is not firm.
Repair method: Reinstall the equipment to ensure balance; strengthen the equipment foundation.
7. Poor lubrication.
Possible reasons: Insufficient lubricating oil, lubrication system failure.
Maintenance methods: Add lubricating oil, check the lubrication system, and repair faults.
8. Uneven feeding.
Possible reasons: Improper design of the feed port and incorrect feeding method.
Maintenance method: Modify the design of the feed port and adjust the feeding method.
HGM series ultrafine powder grinding mill
HGM series ultrafine powder grinding mill is a type of grinding equipment designed for processing ultrafine powder. it is commonly used in various industries, including mining, metallurgy, chemical, and construction. HGM series ultrafine powder grinding mills are known for its capability to produce fine and ultrafine powders with high efficiency.
1.High efficiency: HGM series ultrafine powder grinding mill machine is designed to provide high grinding efficiency for various materials, thereby producing fine powder and ultrafine powder.
2. Multi-stage grinding: HGM series ultra-fine grinding mills usually use multiple grinding stages to achieve the required fineness of the final product.
3. Wide scope of application: suitable for grinding various non-flammable and explosive materials with Mohs hardness less than 9.3 and humidity less than 6%, such as quartz, feldspar, calcite, limestone, talc, ceramics, marble, granite, dolomite, aluminum Earth ore, iron ore, barite, bentonite, coal, etc.
4. Adjustable fineness: Users can usually adjust the fineness of the final product between 325-2500 mesh fineness according to their specific requirements.
5. Environmental protection: HGM series ultrafine powder grinding mill adopts advanced dust removal and noise reduction systems to improve environmental friendliness.
6. Advanced technology: HGM series ultrafine powder grinding mill usually uses advanced grinding technology and design to achieve efficient and precise particle size reduction.
More products
Besides HGM series ultrafine powder grinding mill, I can also provide you with CLUM series ultrafine powder grinding mill, YGM series Raymond mill,Impact Crusher, PE Series Jaw Crusher,Ball mill and CLG Series Powder Surface Coating Machine .
